FM-3-02 milk filter
Description
FM-3-02 milk filter
The milk filter is made of high-quality stainless steel. It is installed downstream of the milk-receiving unit pump and is used for milk filtration during milking.
The filter is equipped with a stainless-steel reusable filter element with side outlet port (filtration mesh 32 µm).
Connection to the pump is via a DN40 DIN nut. The outer diameter of the outlet port is 40 mm.
Specifications
- Material Stainless steel
- Inlet DN40 DIN
- Outlet Ø40 mm
- Filter element Mesh (32 µm)
- Valve None
Similar products
Specifications
- Material AISI 304
- Inlet DN40 DIN
- Outlet Ø40 mm
- Filter element Spiral / sleeve
- Valve Air-admittance
FM-3 milk filter (with air-admittance valve)
Specifications
- Material Stainless steel
- Inlet Ø40 mm
- Outlet Ø40 mm
- Filter element Spiral / sleeve
- Valve None
FM-4 milk filter
Specifications
- Material Stainless steel
- Inlet Ø35 mm
- Outlet Ø35 mm
- Filter element Spiral / sleeve
- Valve None
FM-2 milk filter
Specifications
- Material Stainless steel
- Inlet Ø26 mm
- Outlet Ø26 mm
- Filter element Spiral / sleeve
- Valve None
FM-1 milk filter
Specifications
- Material Stainless steel
- Inlet DN40 DIN
- Outlet Ø40 mm
- Filter element Spiral / sleeve
- Valve None
FM-3 milk filter
Durable Replacement Parts for Heavy Farm Cycles
Chemical-Resistant Polymers
All rubber, silicone, and composite parts withstand harsh acid and alkaline CIP cleaning chemicals.
Airtight Vacuum Seals
Precision-molded gaskets and membranes prevent system air leaks, preserving consistent line vacuum.
High-Wear Durability
Tough materials prevent premature cracking, elasticity loss, or fatigue under multi-shift milking.
Sanitary Design
Smooth surfaces eliminate internal crevices where milk residue and bacterial biofilms could accumulate.
How to Select the Right Milking Spare Parts?
Selecting correct replacement hardware requires checking equipment brand, line diameter, operational hours, and hygiene wear limits.
Step 1
Check milking hours
Replace rubber liners every 2500 milking sessions or six months to avoid loss of elasticity and teat damage.
Step 2
Verify connection sizes
Match inner and outer hose diameters, claw nozzles, and valve couplings to prevent vacuum drops.
Step 3
Select material type
Choose between economical nitrile rubber or long-lasting silicone liners based on your washing temperatures.
Step 4
Maintain service kits
Keep essential gaskets, pulsator membranes, and clamp seals on site for instant field maintenance.
Our news
Contact us
Address
Prátelství 986/19
104 00 Praha 22-Uhříněves
Czech Republic
104 00 Praha 22-Uhříněves
Czech Republic
Phones
